Chrome Swan Neck Drinking Water Filter Tap

Our swan neck chrome drinking water filter tap can be purchased separately or with one of our drinking water filters. 

Here are the drinking water tap measurements:

Reach - 12cm

Base to Spout tip - 18-20cm (depending on whether you have the short or tall lower body installed - see technical drawing image)

Base to top of Spout - 24-26cm (depending on whether you have the short or tall lower body installed - see technical drawing image)

Also available in brushed nickel..

You can also select a couple of metres of John Guest blue tubing if you need it.

Features

• Modern styling - suits the majority of modern sinks / kitchens.
• Fixed sanitip - means no more cracked plastic ends.
• 7'' spout - not too long and not too short which means that it will reach the sink from wherever you place it on your worktop but not overly long so that it gets in the way all the time. It's high enough so you can fit your kettle or carafe underneath, but not so high that it drowns out your existing tap.
•  Retained spout - retained by threaded cap and circlip, not just screwed into the body.
• Long lever - easy for children, the elderly or arthritis sufferers.
• Plastic internals - combined with alloy body and brass stud and spout helps reduce cost and lower lead content.
• Ceramic disc valve - for easy smooth operation and greater reliability. Can be easily cleaned or replaced in situ.
• O Ring base seal - No unsightly black washers.
• 3'' or 4'' stud - with the popular pushfit tail. Simply use large or small lower body to adjust length. 

If you need any assistance with any of our drinking water filter taps then please do not hesitate to call us on 01352838281 or send us a message through our contact page. 

Free UK P&P on any drinking water filter tap.