Our Monza brushed steel 3 way tap combines practicality with functionality. It has a beautifully designed double curved spout with a single aerator at the end. This 3 way tap is very stylish and will compliment any modern kitchen.
The left hand lever on the Monza 3 way tap operates the filtered water, with the right hand lever for both hot and cold water.
The Monza 2 lever 3 way tap is dual flow. It has a heat resistant plastic tube within the quad spout which has been tested to temperatures far above normal hot water.
It comes supplied with 3 x 400mm flexible hoses which can connect to both copper and compression fittings.
You will receive the new, improved and upgraded Solid Fix Installation Kit which offers increased support around the base.
The Monza 3 way tap is also available in a chrome finish.
Technical info
Spout | Dual flow, single aerator, Quad design |
Operation | Left - filtered, Right - hot & cold |
Dimensions | 335mm high & 209mm reach |
Pressurised Water System | Yes |
Gravity with Booster Pump | Yes |
Combi Boiler System | Yes |
Conventional Gravity (open plumbing system) | Yes - 5M of head |
Minimum recommended pressure | 0.5 bar |
Flow Rate Hot & Cold (litre per minute) | Low; Hot 6.10 L/M @ 0.5 bar |
Aerator | Honeycomb |
Flexible hose inlet | 10mm |
Hot & Cold flexible hose outlet | 1/2'' female with adapter |
Filtered Flexible hose outlet | 1/2'' female with adapter |
Flexible hose length | 350mm |
Recommended hole diameter | 35mm |
Sink/Worktop thickness | 0-50mm |
Footprint diameter | 50mm |
Workmanship & parts warranty | 3 years |
Finish warranty | 1 year |
You can select either a 1/4" or 3/8" tap adapter when buying one of our 3 way taps.
This converts the 1/4" (or 3/8") tubing that comes with the water filter to connect to the tap tails.
SKU: ACQ507SF2CR
The Monza is a practical, functional and beautifully designed 3 way tap.
SKU: ACQ507SF3CR
The Monza 3 way tap is available in either a chrome or brushed steel finish.
This is the basket Message
This is the basket Message