LAST CHANCE TO BUY - LAST FEW REMAINING - ONCE THEY'RE GONE THEY'RE GONE.
Despatched for 1 or 2 day delivery, depending on stock.
Our Monza brushed steel 3 way tap combines practicality with functionality. It has a beautifully designed double curved spout with a single aerator at the end. This 3 way tap is very stylish and will compliment any modern kitchen.
The Monza 3 way tap has a standard hot on the left and cold on the right with the middle lever delivering fresh filtered water.
This is a dual flow 3 way tap. It has a heat resistant plastic tube within the quad spout which has been tested to temperatures far above normal hot water.
Supplied with 3 x 400mm flexible hoses which can connect to both copper and compression fittings.
You will receive the Solid Fix Installation Kit which offers increased support around the base.
The Monza 3 way tap is also available in a chrome.
Technical info
Spout
Dual flow, single aerator, Quad design
Operation
Left - hot, Right - cold, Middle - filtered
Dimensions
335mm high & 209mm reach
Pressurised Water System
Yes
Gravity with Booster Pump
Yes
Combi Boiler System
Yes
Conventional Gravity (open plumbing system)
Yes - 5M of head
Minimum recommended pressure
0.5 bar
Flow Rate Hot & Cold (litre per minute)
Hot 6.20 L/M @ 0.5 bar
Aerator
Honeycomb
Flexible hose inlet
10mm
Hot & Cold flexible hose outlet
1/2 inch female with adapter
Filtered Flexible hose outlet
1/2 inch female with adapter
Flexible hose length
350mm
Recommended hole diameter
35mm
Sink/Worktop thickness
0-50mm
Footprint diameter
50mm
Workmanship & parts warranty
3 years
Finish warranty
1 year
Which tap adapter do I need?
You can select either a 1/4" or 3/8" tap adapter when buying one of our 3 way taps.
This converts the 1/4" (or 3/8") tubing that comes with the water filter to connect to the tap tails.
