Please check availability before ordering. Send us a message HERE or call us on 01352 838 281.
Our Monza chrome 3 way tap combines practicality with functionality. It has a beautifully designed double curved spout with a single aerator at the end. This 3 way tap is very stylish and will compliment any modern kitchen.
The left hand lever on the Monza operates the filtered water, with the right hand lever for both hot and cold water.
The Monza is dual flow. It has a heat resistant plastic tube within the quad spout which has been tested to temperatures far above normal hot water.
This 3 way tap is supplied with 3 x 400mm flexible hoses which can connect to both copper and compression fittings.
You will receive the new, improved and upgraded Solid Fix Installation Kit which offers increased support around the base.
The Monza 3 way tap is also available in a brushed steel finish.
Technical info
Spout
Dual flow, single aerator, Quad design
Operation
Left - filtered, Right - hot & cold
Dimensions
335mm high & 209mm reach
Pressurised Water System
Yes
Gravity with Booster Pump
Yes
Combi Boiler System
Yes
Conventional Gravity (open plumbing system)
Yes - 5M of head
Minimum recommended pressure
0.5 bar
Flow Rate Hot & Cold (litre per minute)
Low; Hot 6.10 L/M @ 0.5 bar
Aerator
Honeycomb
Flexible hose inlet
10mm
Hot & Cold flexible hose outlet
1/2'' female with adapter
Filtered Flexible hose outlet
1/2'' female with adapter
Flexible hose length
350mm
Recommended hole diameter
35mm
Sink/Worktop thickness
0-50mm
Footprint diameter
50mm
Workmanship & parts warranty
3 years
Finish warranty
1 year
Which tap adapter do I need?
You can select either a 1/4" or 3/8" tap adapter when buying one of our 3 way taps.
This converts the 1/4" (or 3/8") tubing that comes with the water filter to connect to the tap tails.
