Orta Pallas 3 Way Tap in 9 luxurious finishes triflow taps

Product SKU: ACQ506DF2

UPC/EAN:

There are three 'tails' for the water supply to connect to; hot, cold, and filtered.

Each has a 15mm compression fitting to connect to the water supply.

Filtered water is usually connected via plastic tubing; commonly 1/4" or 3/8ths.

This means there needs to be an adaptor so we offer you a choice.

If you're not sure which you need then we recommend the 1/4" because it's the most common.

Description

Despatched for 1 or 2 day delivery, depending on stock.

The Orta Pallas 3 way tap is available in two finishes.

Hot and cold water is delivered to you via the top lever and the handle under the spout gives you filtered water.

The Orta Pallas 3 way tap is supplied with 3 x 400mm flexible hoses which can connect to both copper and compression fittings.

When you're selecting the finish for your triflow tap, a special order finish means that your tap will be ordered from Italy for you and therefore a delay in delivery will occur. There are two finishes that are always in stock; chrome and brushed nickel.

Technical info

Spout	Dual flow, dedicated aerators, long reach design
Operation	Top - hot & cold, Front - filtered
Dimensions	210mm high & 230mm reach
Pressurised Water System	Yes
Gravity with Booster Pump	Yes
Combi Boiler System	Yes
Conventional Gravity (open plumbing system)	Not recommended
Minimum recommended pressure	1.0 bar
Flow Rate Hot & Cold (litre per minute)	High, 6.20 L/M mixed @ 1.0 bar
Aerator	Honeycomb
Flexible hose inlet	10mm
Hot & Cold flexible hose outlet	1/2'' female
Filtered Flexible hose outlet	1/2'' male
Flexible hose length	350mm
Recommended hole diameter	35mm
Sink/Worktop thickness	0-50mm
Footprint diameter	50mm
Workmanship & parts warranty	3 years
Finish warranty	1 year

Here to help : 01352 838281

Free DOWNLOAD: 10 Ways to Find the Water Filter That's Right For You

Orta Pallas 3 Way Tap