Here to help : 01352 838281

Orta Pallas 3 Way Tap

Our Orta Pallas 3 way tap is available in two stunning finishes.



Product SKU: ACQ506DF2



There are three 'tails' for the water supply to connect to; hot, cold, and filtered.

Each has a 15mm compression fitting to connect to the water supply.

Filtered water is usually connected via plastic tubing; commonly 1/4" or 3/8ths.

This means there needs to be an adaptor so we offer you a choice.

If you're not sure which you need then we recommend the 1/4" because it's the most common.

Despatched for 1 or 2 day delivery, depending on stock.

The Orta Pallas 3 way tap is available in two finishes.

Hot and cold water is delivered to you via the top lever and the handle under the spout gives you filtered water.

The Orta Pallas 3 way tap is supplied with 3 x 400mm flexible hoses which can connect to both copper and compression fittings.

When you're selecting the finish for your triflow tap, a special order finish means that your tap will be ordered from Italy for you and therefore a delay in delivery will occur. There are two finishes that are always in stock; chrome and brushed nickel.

Technical info 

Spout Dual flow, dedicated aerators, long reach design
Operation Top - hot & cold, Front - filtered
Dimensions 210mm high & 230mm reach
Pressurised Water System Yes
Gravity with Booster Pump Yes
Combi Boiler System Yes
Conventional Gravity (open plumbing system) Not recommended
Minimum recommended pressure 1.0 bar
Flow Rate Hot & Cold (litre per minute) High, 6.20 L/M mixed @ 1.0 bar
Aerator Honeycomb
Flexible hose inlet 10mm
Hot & Cold flexible hose outlet 1/2'' female
Filtered Flexible hose outlet 1/2'' male
Flexible hose length 350mm
Recommended hole diameter 35mm
Sink/Worktop thickness 0-50mm
Footprint diameter 50mm
Workmanship & parts warranty 3 years
Finish warranty 1 year


This is the basket Message

This is the basket Message