Pearl Hard Water Filter

Our Pearl hard water filter is a high performance drinking water filter system that improves the taste and odour of your water, removes chlorine and sediments and reduces it's hardness.

This hard water filter effectively prevents limescale and rust build up in your household appliances such as kettles, coffee machines, taps, electric showers, water heaters and many other types of cold water processing equipment.

How hard is my water? In the north and west of the UK the water is naturally soft, wheras, in the south and east it is naturally hard. Approximately 60% of houses in the UK have hard water.

The Pearl hard water filter is suitable for under sink or counter top mounting.

The housing dimensions are 34H x 14W x 13D (volume occupied in cm).

Your kit will include:

• 1 x white filter housing
• 1 x single white housing bracket
• 1 x 5 micron activated carbon block cartridge (F109009) with a phosphate insert (F236). We sometimes substitute the phosphate insert with phosphate balls. They both do the same job.
• A choice of 5 taps, or you can choose the 'no tap' option.
• A choice of either a self-piercing saddle valve or a 15mm compression valve.
• Blue tubing (approximately 2 metres)
• Red tubing (approximately 2 metres)
• 1 x housing spanner
• DIY instructions - No need for a plumber!

Cartridge details:

• Watts F109009 coconut shell carbon block filter cartridge for chlorine, taste and odour reduction.
• 1 x phosphate insert (F236) for hardness reduction. We sometimes substitute the phosphate insert with phosphate balls. They both do the same job.
• 2.5 x 10"
• 5 micron - up to 99% chlorine removal.
• Chlorine reduction >4,000 gallons @ 1.0gsm or 12 months; whichever comes first.
• Thick wall carbon construction for superior performance.
• Outperforms granulated activated carbon (GAC) cartridges as it has superior chlorine reduction, lower pressure drop and will not channel.
• Media wrap between centre tube and carbon block to reduce carbon fibres.
• Maximum operating pressure - 125psi.
• Operating temperature - 50°F to 125°F / 10°C to 52°C.
• Tested and certified NSF/ANSI standard 42 for materials only.
• FDA grade components and materials.
• Tested and verified by independent lab testing.
• Replacement cartridges are £35.99 and we send out email reminders.

Effects of hard water

It's the dissolved minerals in hard water that gives it the following characteristics:

• Scale and scum formation. For example, either on the surface of the water or around hand basins and baths.
• Difficulty in getting a soapy lather. This is caused by the calcium in the hard water reacting with soaps and detergents.

The minerals that contribute to water hardness are calcium and magnesium, mainly in combination with bicarbonate, sulphate and chloride. When hard water is heated above 61° (or as it evaporates) the balance between the dissolved minerals is upset and the bicarbonate converts to carbonate. This is where you get the calcium carbonate scale (limescale).

How is hard water measured?

Hardness in water is measured in mg/l or ppm (parts per million) of calcium carbonate equivalent (the main component of limescale). The word equivalent is used to show that it is not calcium carbonate that is being measured (it cannot be as calcium carbonate is not present in water) but that the amount of different hardness minerals present in the water is chemically equivalent to an amount of calcium carbonate.