Our Sorrento brushed steel 3 way tap combines the Euro look with functionality. It has a beautifully curved spout with a single aerator at the end.
This 3 way tap is very trendy and will compliment any modern kitchen.
The Sorrento 3 way tap has a standard hot on the left and cold on the right configuration with the middle lever delivering filtered water.
Deliverd with 3 x 400mm flexible hoses which can connect to both copper and compression fittings.
The Sorrento 3 way tap is also available in a chrome finish.
Technical info
Spout | Dual flow, dedicated aerators, Euro design |
Operation | Left - hot, Right - cold, Middle - filtered |
Dimensions | 305mm high & 235mm reach |
Pressurised Water System | Yes |
Gravity with Booster Pump | Yes |
Combi Boiler System | Yes |
Conventional Gravity (open plumbing system) | Yes - 5M of head |
Minimum recommended pressure | 0.5 bar |
Flow Rate Hot & Cold (litre per minute) | Hot 5.10 L/M @ 0.5 bar |
Aerator | Honeycomb |
Flexible hose inlet | 10mm |
Hot & Cold flexible hose outlet | 1/2'' female with adapter |
Filtered Flexible hose outlet | 1/2'' female with adapter |
Flexible hose length | 350mm |
Recommended hole diameter | 35mm |
Sink/Worktop thickness | 0-50mm |
Footprint diameter | 50mm |
Workmanship & parts warranty | 3 years |
Finish warranty | 1 year |
You can select either a 1/4" or 3/8" tap adapter when buying one of our 3 way taps.
This converts the 1/4" (or 3/8") tubing that comes with the water filter to connect to the tap tails.
SKU: ACQ502DF2CR
This 3 way tap combines the Euro look with brilliant functionality.
SKU: ACQ502DF3CR
Hot, cold and filtered water from one 3 way tap. It doesn't get much better than that.
This is the basket Message
This is the basket Message