Cold Water Tap Filter Moby

A mains water filter that will dramatically improve the taste and smell of your mains water and remove chlorine, chemicals, micro plastics (to 1 micron with "super" cartridge), PFAS, sediments, and more.

This Moby mains water filter fits to the cold water supply to your kitchen tap so there's no need for a separate water filter tap. If you want a whole house filter look for the Doby range.

When fitting your mains water filter please allow for a minimum of H 38cm x W 30cm x D 18cm.

Your kit will include:

• 1 x big blue filter housing
• 1 x white housing bracket
• 1 x 5 micron activated carbon block cartridge (Watts WCBFF975) or you can select the MAXCL-FF975 or equivalent for maximum chlorine reduction. 
• Either 1/2 for 15mm or 3/4 for 22mm ports
• Isolating flexis (no need for extra ball valves)
• 1 x double check valve
• 1 x housing spanner
• Fitting instructions for your plumber. You can download the fitting instructions by clicking the link under the product image.

Cartridge details:

• Watts WCBFF975 coconut shell carbon block filter cartridge for chlorine, taste, odour and sediment reduction.*
• 5 micron / 4.5 x 10"
• Outperforms GAC cartridges as it has superior chlorine reduction (up to 99%), lower pressure drop, will not channel and costs less than a GAC cartridge.
• Media wrap between centre tube and carbon block to reduce carbon fines.
• 100% coconut shell carbon.
• FDA grade components and materials.
• Recommended flow rate - 4 gpm
• Maximum operating pressure: 125 PSIG
• Operating temperature: 10°C - 52°C / 50°F - 125°F
• Chlorine reduction - >10,000 Gal @ 2 gpm
• Tested and certified under NSF / ANSI standard 42 for materials only.

*on some occasions a different brand of carbon block cartridge may be used. 

As an alternative to the Watts WCBFF975 you can select the Watts MAXCL-FF975 (or equivalent) carbon block water filter cartridge for longer life and high chlorine reduction - it's also better for PFAS.

Here's some details on the Watts MAXCL-FF975.

• Solid block activated carbon for long life
• Reduction of certain VOC's
• Thick wall for greater chlorine, taste and odour reduction
• Highly effective chlorine, taste and odour reduction through 70,000 gallons at 2 gpm flow rate. It will also be effective at higher flow rates e.g. 35,000 gallons at 4 gpm. 
• Reduces fine sediment and rust particles
• 0.5 micron nominal filtration
• Temperature range 40-165°F (4.4-73.8°C)
• Fits standard full flow & BB filter housings 4.5 x 10"

Do I have to install a mains water filter under my sink?

No, you don't. You can install your mains water filter wherever is most suitable. However, a Moby is not a whole house filter unless it is a single person / one bathroom property.

* Watts components are sometimes replaced with other similar quality items due to supply chain issues. Brassware and other plumbing accessories are sourced from UK suppliers.