Doby Taste and OneFlow Water Filter Cartridge Set

An environmentally friendly solution for preventing scale build up. 

The most effective salt-free scale prevention technology there is plus a sector leading carbon block.

The perfect hard water filter and water quality cartridge combination for residential systems. 

Fits our 4.5 x 20'' Doby housings.

If your water is harder than 25 grains (427 ppm CaCO3) then OneFlow may not be suitable for you. Check with your local water supplier who will be able to tell you what the hardness measurement is. 

Please note that a TDS meter may give you a higher reading but it's measuring all total dissolved solids and not just CaCO3. This is another reason to contact your local water supplier.

Cartridge details:

• Watts One Flow OF140RM
• Watts WCB5FF20 Carbon Block
• 4.5" x 20"
• Up to 20  litres per minute with a working life of approximately 12 months
• Certified NSF/ANSI standard 42 NSF
• Certified by ISO 9001
• Performance tested and verified by independent laboratory testing.

How to replace TAC media

When you replace the media you need to allow it to become saturated and expand for at least two hours before turning the water flow back on. If you miss this out some of the smaller particles can escape into the pipework and be lost.

Why do I need to change the o-ring?

You can tell if the seals start leaking, which is obvious, I know.

Even if there are no leaks you may find that the profile of the O ring becomes flattened because of prolonged time under compression. The cross section should be round and if it's not it may not seal easily.

However, we recommend that you replace the O rings every two or three years as a precautionary measure.

One of the main reasons for changing O rings periodically is that as they age and compress, the housing bowl needs to be tightened excessively. That leads to difficulty loosening the bowl from the cap next time the cartridge needs to be replaced.