Moby M - Metals Mains Water Filter

Our single Moby mains water filter for the removal of heavy metals.

GAC/KDF 55 filter media removes a variety of chemicals and metals including, but not limited to copper, nickel, chromium, lead, mercury, chlorine etc with a reduction efficiency of 90 to 98%.

When fitting your mains water filter please allow for a minimum of H 38cm x W 30cm x D 18cm.

For greater capacity to remove chlorine and chemicals you'll need our Moby TM.

Your kit will include:

• 1 x big blue filter housing
• 1 x white housing bracket
• 1 x 4.5 x 10" GAC/KDF cartridge for heavy metals removal
• Either 1/2 for 15mm or 3/4 for 22mm ports
• 2 x Isolating flexis 
• 1 x double check valve - either 15mm or 22mm
• 1 x housing spanner
• Fitting instructions 

Cartridge details:

• 1 x 4.5 x 10" canister containing GAC/KDF filter medium (GAC10N/KDF-BOM) for heavy metals removal.
• 20 micron
• 12,000 gallons @ 2.0gpm or 12 months; whichever comes first
• Certified NSF/ANSI standard 42 NSF
• Certified by ISO 9001
• Performance tested and verified by independent laboratory testing

Do you have to install a mains water filter under the sink?

No, you don't. You can install your mains water filter wherever the cold water supply enters your house. This could be a utility room, garage, or other location. 

* Watts components are sometimes replaced with other similar quality items due to supply chain issues. Brassware and other plumbing accessories are sourced from UK suppliers.