Cold Water Tap Filter Moby

A mains water filter that will dramatically improve the taste and smell of your mains water and remove chlorine, chemicals, micro plastics (to 0.5 micron with "super" cartridge), PFAS, sediments, and more.

This Moby mains water filter fits to the cold water supply to your kitchen tap so there's no need for a separate water filter tap. If you want a whole house filter look for the Doby range.

When fitting your mains water filter please allow for a minimum of H 38cm x W 30cm x D 18cm.

Your kit will include:

• 1 x big blue filter housing
• 1 x white housing bracket
• 1 x 5 micron activated carbon block cartridge (Watts WCBFF975) or you can select the MAXCL-FF975 or equivalent for maximum chlorine reduction. 
• Either 1/2 for 15mm or 3/4 for 22mm ports
• Isolating flexis (no need for extra ball valves)
• 1 x double check valve
• 1 x housing spanner
• Fitting instructions for your plumber. You can download the fitting instructions by clicking the link under the product image.

Cartridge details:

• Watts WCBFF975 coconut shell carbon block filter cartridge for chlorine, taste, odour and sediment reduction.*
• 5 micron / 4.5 x 10"
• Outperforms GAC cartridges as it has superior chlorine reduction (up to 99%), lower pressure drop, will not channel and costs less than a GAC cartridge.
• Media wrap between centre tube and carbon block to reduce carbon fines.
• 100% coconut shell carbon.
• FDA grade components and materials.
• Recommended flow rate - 4 gpm
• Maximum operating pressure: 125 PSIG
• Operating temperature: 10°C - 52°C / 50°F - 125°F
• Chlorine reduction - >10,000 Gal @ 2 gpm
• Tested and certified under NSF / ANSI standard 42 for materials only.

*on some occasions a different brand of carbon block cartridge may be used. 

As an alternative to the Watts WCBFF975 you can select the Watts MAXCL-FF975 (or equivalent) carbon block water filter cartridge for longer life and high chlorine reduction.

Here's some details on the Watts MAXCL-FF975.

• Solid block activated carbon for long life
• Reduction of certain VOC's
• Thick wall for greater chlorine, taste and odour reduction
• Highly effective chlorine, taste and odour reduction through 70,000 gallons at 2 gpm flow rate. It will also be effective at higher flow rates e.g. 35,000 gallons at 4 gpm. 
• Reduces fine sediment and rust particles
• 0.5 micron nominal filtration
• Temperature range 40-165°F (4.4-73.8°C)
• Fits standard full flow & BB filter housings 4.5 x 10"

Do I have to install a mains water filter under my sink?

No, you don't. You can install your mains water filter wherever is most suitable. However, a Moby is not a whole house filter unless it is a single person / one bathroom property.

* Watts components are sometimes replaced with other similar quality items due to supply chain issues. Brassware and other plumbing accessories are sourced from UK suppliers.