One cartridge (LRC 2510-P5) that does all of this...
You can tell if the seals start leaking, which is obvious, I know.
Even if there are no leaks you may find that the profile of the O ring becomes flattened because of prolonged time under compression. The cross section should be round and if it's not it may not seal easily.
However, I recommend that you replace the O rings every two or three years as a precautionary measure.
One of the main reasons for changing O rings periodically is that as they age and compress, the housing bowl needs to be tightened excessively. That leads to difficulty loosening the bowl from the cap next time the cartridge needs to be replaced.
This is the basket Message
This is the basket Message