Home / Water Filter Cartridges / UV Water Filter Lamps and Sleeves
We stock Luminor, Atlas and Watts UV water filter lamps and sleeves.
We're also able to supply UV water filter components. Click HERE to take a look.
It's so important to keep your UV water filter running smoothly. Below you'll find tips on when to clean and when to replace your UV water filter components. Learn the basics of how often, why, and how to maintain your system for maximum efficiency!
Genuine Luminor replacement - RL-999 for LB5-153 UV system.
The RL-850 lamp is a genuine Luminor replacement. It fits the LB5-203 UV system.
Compatible UV replacement lamp for a Luminor LB5-033 UV system. The Atlas RL-12.
The RL-22 Atlas lamp is a compatible replacement for the Luminor LB5-063 UV system.
The RL-41 replacement lamp is compatible with the Luminor LB5-103 UV system.
The RL-210HO lamp is a genuine Luminor replacement. It fits the LB5-051/LB6-051 UV system.
The RQ-41 by Atlas is a compatible replacement quartz sleeve for the Luminor LB5-103 UV water treatment system.
Replacement Quartz Sleeve RQ-850 for the LB5-203 UV water filter.
UV replacement quartz sleeve RQ-12 for LB4/LB5-033 RQ-290 UV water treatment system.
Compatible replacement Quartz Sleeve RQ-470 for the LB5-063 UV water filter.
Compatible quartz sleeve RQ-57 for the Luminor RL-999 LB5-153 series UV water treatment system.
Atlas RL12 UV lamp is the genuine lamp replacement for the Atlas L12 UV water filter treatment system.
Atlas RL22 UV lamp is the genuine lamp replacement for the Atlas L22 UV water filter treatment system.
Atlas RL41 UV lamp is the genuine lamp replacement for the Atlas L41 UV water filter treatment system.
Atlas RL57 UV lamp is the genuine lamp replacement for the Atlas L57 UV water filter treatment system.
Atlas RL79 UV lamp is the genuine lamp replacement for the Atlas L79 UV water filter treatment system.
Replacement quartz sleeve for the Atlas L12 UV water filter. Free UK standard delivery.
Replacement quartz sleeve (RQ22) for the Atlas L22 UV water filter. We offer free standard delivery on all UV quartz sleeves.
Replacement quartz sleeve RQ41 for the Atlas L41 UV water filter.
Replacement quartz sleeve RQ57 for the Atlas L57 UV water filter.
Replacement quartz sleeve RQ79 for the Atlas L79 UV water filter.
Replacement UV Lamp for Watts WUV6-230 6 gpm UV water filter.
Replacement UV Lamp for WUV8-230 8 gpm UV water filter.
Replacement UV Lamp for WUV12-230 12 gpm UV water filter.
Replacement Watts quartz sleeve for WUV6-230.
Replacement quartz sleeve for Watts WUV8-230.
Replacement Watts quartz sleeve for WUV12-230.
UV water filters are an effective way to disinfect your drinking water and improve its taste. Keeping your UV filter in top condition will ensure that it runs efficiently and effectively at all times. Below, you'll find tips on when and how to clean, inspect, and replace parts of your UV filter for optimal performance.
The glass lamps in your UV water filter play a critical role in disinfecting the water going into your home. Check the lamp regularly for signs of wear-and-tear, such as cracks or discoloration. If it’s damaged, replace the lamp immediately to avoid losing any disinfecting benefits of your filter. Most lamps should be replaced every 12 months, but be sure to read the manufacturer’s instructions for more specific information on replacement intervals.
We currently stock Luminor, Atlas and compatible lamps for Watts UV water filters.
The quartz sleeve is a component of the UV water filter system, and it encloses the lamp to keep it safe from contact with the water. Depending on your specific UV filter, the quartz sleeve should be replaced every 24 months or as needed. Regular maintenance of your UV system will ensure that you get maximum performance from your filter.
Depending on the water quality, the quartz sleeve may require periodic cleaning. At a minimum, the quartz sleeve should be cleaned on an annual basis. The following steps outline a basic cleaning procedure.
Step 1: If a by-pass assembly is installed, shut the inlet valve off to prevent water flow through the system. Otherwise, turn off main water inlet valve (and/or turn off the water pump).
Step 2: Disconnect power cord of UV system from electrical outlet.
Step 3: Release water pressure by opening a downstream tap and then close the outlet shut-off valve (if any). If there is no outlet shut-off valve, expect water to drain from the system as the head pressure in the system will cause the water to flow back down.
Step 4: Remove the captive ground screw from the ground lug on the UV reactor.
Step 5: Remove the lamp connector from the reactor (gland nut) by pushing the LUMI-loc connector in and turning it ¼ turn counter-clockwise. Disconnect the lamp connector from the lamp. CAUTION: the lamp may be hot!
Step 6: Being careful to touch only the ceramic ends, remove the lamp out of the reactor.
Step 7: Unscrew the gland nut from the reactor exposing the end of the quartz sleeve.
Step 8: Remove the quartz sleeve and o-ring by gently twisting and pulling the quartz sleeve.
Step 9: Using a soft, lint-free cloth or towel wipe the sleeve down using a commercial scale cleaner (i.e. CLR®️ or LIME-A-WAY®️). This removes scaling or iron deposits that may be on the outside of the quartz sleeve. Be careful not to get any moisture or liquids inside of the sleeve.
Step 10: Dry the sleeve with separate cloth.
Step 11: Replace the o-ring and slide the sleeve back into the reactor following steps 7 and 8 from the installation section of the manual.
Regularly inspecting your UV water filter for any potential issues is important. If you notice any leakage, damage or cracks in the quartz sleeve, it's best to replace it immediately. Keeping an eye out for any signs of damage will ensure that your UV water filter lasts and keeps your water disinfected to the highest standard.
Consider the quality and usage rate of your water when determining how often to clean or replace your UV filter. Stagnant or high-usage water should be monitored more frequently than low-usage water, as it can lead to greater levels of pollution and contamination in a short period of time. If you’re using your UV water filter on an everyday basis, make sure to check it at least once a month to make sure it’s still functioning properly.
Regular maintenance of your UV water filter involves changing the pleated sediment filter cartridge as needed. Over time, it may become clogged with dirt and other debris, which can reduce its effectiveness in filtering out impurities from the water. When this happens, replace the old water filter cartridge with a new one to get optimal performance from your UV filter and ensure clean, disinfected drinking water.
What our customers have to say about us
18 Oct 2023Great 3-way tap, which was well packaged, with clear instructions. Our plumber commended the tap as good quality and easy to plumb in and connect to both water supply and under-sink filter. Looks brilliant in our new kitchen. Thanks to Fountain Filters for a helpful website and speedy delivery service.
12 July 2023Great product, simple to install including hints on common installation challenges which I did have and overcame instantly because of the care taken by the seller. Whole of house now has soft water without a noticeable drop in pressure. Has made a massive difference throughout.
1 Dec 2023It was a small but important order: replacement o-ring with silicon for my water filter housing. when I told them I had not received the articles after 7 days, they without fuss dispatched a replacement with the result I received the original and replacement 3 days later! Very responsive customer service.
17 June 2023After moving into a property with a fresh water supply, I turned to Fountain Filters for advice on replacing the water filter system. I purchased the Moby Twin Sediment System and it has been a worry-free system. Even changing the filters was far easier than the old system. Cannot fault this company on speed of service or quality of advice.
We're here to help! Our dedicated helpline is ready to answer your questions and provide solutions.
Free standard delivery in the UK on all water filter products.
Shop with confidence knowing our water filters have a 12 month guarantee.
Change of mind? Exchange or return any product easily.
Subscribe for wave after wave of water wisdom.
Fountain Filters, Strowger House,
Sandy Lane Ind. Est.
Newcastle upon Tyne, NE3 5HE, UK.
https://w3w.co/pipes.ranked.dates
VAT Reg: 370859370
